jablotron CA-2103 Athos Installation Manual page 8

Car alarm
Hide thumbs Also See for CA-2103 Athos:
Table of Contents

Advertisement

14. Technical parameters of the car alarm
power supply
idle current consumption
peak consumption (during communication)
working range of the GSM module
max. output power of the transmitter 2 W for GSM850/900, 1 W for GSM1800/1900
remote control receiver frequency
operating temperature range
SIR output
immobilization circuit
output signals for control of the central locks
length of impulses for the central locks
comply with ECE regulation No.116
safety
EMC
radio spectrum
ETSI EN 301 419-1, EN 301 511, ETSI EN 300 220,
can be operated according to ERC REC 70-03, ERC/DEC98(20,21)
JABLOTRON ALARMS a.s. hereby declares that the CA-2103 is in a compliance with
the relevant Union harmonisation legislation: Directives No: 2014/53/EU, 2014/35/EU,
2014/30/EU, 2011/65/EU. The original of the conformity assessment can be found
at
www.jablotron.com
- Section Downloads.
Note: Although this product does not contain any harmful materials
we suggest you return the product to the dealer or directly to the
producer after use.
Produced and sevised by: JABLOTRON ALARMS a.s., Pod Skalkou 33, Jablonec
n.N.
CA-2103 "Athos" – RESET 1
12/24 V DC (8 – 32 V)
max. 20 mA
E-GSM / GPRS 850/900/1800/1900MHz
-20 °C to +85 °C
switching the supply voltage, max. load 1.3 A
8 A permanently, up to 12 A in the short term
max. 200 mA, switching to GND
0.5 s or 4 s or possibly 60 s (selectable)
EN 60950-1
ECE No. 116
E
116RA-00 8108
8
1 A
868.1 MHz
8/8
MHF22009

Advertisement

Table of Contents
loading

Table of Contents