Eurotherm T940X Important Information Leaflet

IMPORTANT INFORMATION LEAFLET
MAINTAINING PRODUCT SAFETY
Misuse of equipment
If the equipment is used in a manner not specified in this handbook the protection provided
by the equipment may be impaired.
Service & repairs
This unit has no user-serviceable parts. The Manufacturer's nearest agent should be con-
tacted for advice on repair services.
Cleaning instructions
A suitable vacuum cleaner may be used to keep the unit and all associated air inlets/outlets
clear of dust buildup. The front panel can be wiped with a damp cloth to keep it clean.
Mild detergents may be used to remove grease, but abrasive cleaners and aggressive organic
solvents must not be used as they can remove the legends and/or damage the plastic labels.
Safe usage of nickel-metal hydride batteries
The battery used for data retention must be stored in a suitable manner, handled and used
correctly, and disposed of safely when spent. For further information, the COSHH state-
ment (included in the product manual) should be referred to.
MAINTAINING PERFORMANCE
In order to maintain the optimum performance of the unit, it is recommended that periodic
preventive maintenance be carried out. See Chapter 8 (Service) of the Handbook for further
details.
A kit of service consumables is available from the manufacturer, under part number
LA028325.
Specification subject to change without notice.
EUROTHERM LIMITED
Faraday Close, Durrington, Worthing, West Sussex, BN13 3PL
Telephone: 01903 205222. Facsimile: 01903 203767
e-mail: info@eurotherm.co.uk
Website: http://www.eurotherm.co.uk
HA028256/3 (CN29111)
Model T940X Process Supervisor
Note: The model T940X is not compatible with the Model T940 for redundant
(duplex) operation.
UNPACKING THE UNIT
The instrument and any accessories should be unpacked carefully and inspected for damage.
The original packing materials should be retained in case re-shipment is required. If there is
evidence of shipping damage, please notify the manufacturer or the carrier within 72 hours
and retain the packaging for inspection by the manufacturer's and/or carrier's representative.
PACKAGE CONTENTS
The package contents should be checked against the order codes, using the labels on the
components. Product labelling includes:
a. Outer packaging label. Shows the full instrument order code, instrument serial number
(including status level).
b. Module labels. One on each module showing serial number and model number/order
code.
e. Memory module label. One label showing software version.
MANUALS REQUIRED
The Process Supervisor Handbook (HA028225) and the Modbus/Profibus communications
manual (HA028014).
For help with the creation of control strategies and sequences using the LINtools package the
LIN Product manual (HA082375U999), and the T500\550LINtools Product manual
(HA082377U999) are required.
For advice on creating a successful Profibus network, reference should be made to Installa-
tion Guidelines for Profibus Networks (HA261788).
HA028256
Issue 3 Nov 12
Important information
Page 1