Panasonic CJ-HDR216A Quick Start Manual page 28

You can refer to the following sheet for detailed information.
SN Name
1 Realtime Play
2 Zoom
3 Realtime Backup
4 Manual Snap
5 Silent
Playback Control
The playback control has the following features.

Support play, pause, and exit and drag function.

During the preview playback process, you cannot see the channel title and record status
of current channel. It will display the channel title and the record status once you exit the
preview playback.

During the preview playback, you cannot switch the displayed channel or change current
window-display mode.

System closes preview control interface when you are switching split mode.

Please note the tour function has the higher priority than the preview playback. You
cannot control the preview playback until the tour function ended.
1 2 3
Figure 2-15
Function
It is to playback the previous 5 - 60 minutes record of current
channel.
Please go to MAIN MENU -> SETTING -> SYSTEM ->
GENERAL -> General to set real-time playback time.
System may pop up a dialogue box if there is no such record
in current channel.
It is to zoom in specified zone of current channel. It supports
zoom in function of multiple-channel.
Click button, the button is shown as
Drag the mouse or use the middle button to select a zone, you
can view.
Right click mouse to cancel zoom and go back to the original
interface.
It is to backup the video of current channel to the USB device.
System cannot backup the video of multiple-channel at the
same time.
Click button, system begins recording. Click it again,
system stops recoridng. You can find the record file on the flash
disk.
Click to snapshot once. The snapshot file is saved on the
USB device or HDD. You can go to the Playback interface
(chapter 2.5 Search & Playback) to view.
Click to mute. Click again to enable audio function when
preview.
Please note this function is for one-window mode only.
4 5
.
23