Schedule - Panasonic CJ-HDR216A Quick Start Manual

System resumes playback after you exit mark management interface.

If the mark file you want to playback has been removed, system begin to playback from the
first file in the list.

2.6 Schedule

Note
You need to have proper rights to implement the following operations. Please make sure the
HDDs have been properly installed.
After the system booted up, it is in default 24-hour regular mode. You can set record type and
time in schedule interface.
In the main menu, from SETTING -> STORAGE -> SCHEDULE, you can go to schedule
menu. See Figure 2-26.
Please note you need to go to MAIN MENU -> SETTING -> SYSTEM -> GENERAL ->
Holiday to set holiday date first, otherwise, there is no holiday setup item.
Channel: Please select the channel number first. You can select "all" if you want to set for the

whole channels.

: Sync connection icon. Select icon
edited together. Now the icon is shown as

: Click it to delete a record type from one period.

Record type: Please check the box to select corresponding record type. There are four types:
Regular/Motion/Alarm/MD (motion detect) & Alarm.

Day: There are eight options: ranges from Saturday to Sunday and all.

Holiday: It is to set holiday setup. Please note you need to go to the General interface (MAIN
MENU -> SETTING -> SYSTEM -> GENERAL -> Holiday) to add holiday first. Otherwise you
cannot see this item.

Pre-record: System can pre-record the video before the event occurs into the file. The value
ranges from 0 to 30 seconds depending on the bit stream.

Redundancy: System supports redundancy backup function. You can highlight Redundancy
button to activate this function. Please note, before enable this function, please set at least
one HDD as redundant. (MAIN MENU -> SETTING -> STORAGE -> HDD MANAGE). Please
note this function is null if there is only one HDD.

Period setup: Click button
in Figure 2-26. There are four record types: Regular, Motion, Alarm, MD & Alarm.
Please following the steps listed below to draw the period manually.

Select a channel you want to set. See Figure 2-23.
of several dates, all checked items can be
.
after one date or a holiday, you can see an interface shown as
Figure 2-23
33