Preview - Panasonic CJ-HDR216A Quick Start Manual

2.3 Preview

After you logged in, the system is in live viewing mode. You can see system date, time,
channel name and window number. If you want to change system date and time, you can
refer to general settings (MAIN MENU -> SETTING -> SYSTEM -> GENERAL -> Date&Time).
If you want to modify the channel name, please refer to the display settings (MAIN MENU ->
SETTING -> CAMERA -> CHANNEL NAME).
1 Recording status
2 Motion detection
Tips
Preview drag: If you want to change position of channel 1 and channel 4 when you are
previewing, you can left click mouse in the channel 1 and then drag to channel 4, release
mouse you can switch channel 1 and channel 4 positions.
Preview Control
The preview control function has the following features.

Support preview playback.

In the preview mode, system can playback previous 5-60 minutes record of current
channel. Please go to MAIN MENU -> SETTING -> SYSTEM -> GENERAL ->
General to set real-time playback time.

Support drag and play function. You can use your mouse to select any playback
start time.

Support playback, pause and exit function.

Right now, system does not support slow playback and backward playback function.

Support digital zoom function.

Support real-time backup function.
You can follow the contents listed below for the operation instruction.
Preview Control Interface
Move you mouse to the top center of the video of current channel, you can see system pops
up the preview control interface. See Figure 2-15. If your mouse stays in this area for more
than 6 seconds and has no operation, the control bar automatically hides.
Figure 2-14
3 Video loss
4 Camera lock
22