General Information; Installation, Use And Maintenance Manual; Identification Data Of The Product - opto engineering AOL0223B Instruction Manual

AO SERIES | INSTRUCTIONS MANUAL

1. General information

1.1 Installation, use and maintenance manual

Opto Engineering s.r.l., with its registered office in strada circonvallazione sud 15,
46100 Mantova (Mn) - Italy, hereinafter the manufacturer, provides all the necessary
information in this installation, use and maintenance manual in a clear and simple way
to install, use and service product AOL0223A and AOL0223B.
The recipients of this manual
capability of understanding the standards, prescriptions and safety measures indicated
in this manual.
Such people will be later identified as qualified personnel
transport, install, use and service the products described in this manual.
This material can only be used by the customer whom this manual has been delivered
to in order to install, use and service the product.
The manufacturer will retain the right to modify or improve the manual and/or the
product referred to in this manual without any prior notice.
The following topographic conventions are followed in this manual:
NOTE: notes contain important information and are highlighted outside the text they refer to
WARNING: these guidelines outline
certain steps that can damage
the product itself if they are not
followed

1.2 Identification data of the product

Products AOL0223A and AOL0223B are identified with a label placed on their top.
This label is used to identify the part number, the serial number and the MAC address
of each product. This set of data is used to identify a single product delivered by the
manufacturer.
are all those who have the knowledge, experience and
who are authorized to
DANGER: these guidelines outline
certain steps that can cause injury
or affect the health of operators
if they are not followed
RoHS
REACH
COMPLIANT
4