opto engineering AOL0223B Instruction Manual page 25

AO SERIES | INSTRUCTIONS MANUAL
DLL_EXTERN_C DLL_API
currentFocusValue, int memoryPos);
Parameters:
• device
• currentFocusValue (output value – focus value saved in onboard memory)
• memoryPos (input value – memory position range [1-5])
The function sends a request for the stored focus value.
It returns an error code (see error code table)
DLL_EXTERN_C DLL_API
memoryPos);
Parameters:
• device
• memoryPos (input value – memory position range [1-5])
The function clears the value of the relative loop position. The device will ignore
positions with no focus values.
It returns an error code (see error code table)
DLL_EXTERN_C DLL_API
currentRestTime);
Parameters:
• device
• restTime (input value in milliseconds – the lens changes its focusing properties by
switching through positions every x milliseconds defined in restTime)
• currentRestTime (output value – Rest Time saved onboard)
Start command for the automatic loop procedure.
The START command is useless if the lens hasn't been switched on previously. It returns
an error code (see error code table)
DLL_EXTERN_C DLL_API
Parameters:
• device
Stop command for the automatic loop procedure.
It returns an error code (see error code table).
DLL_EXTERN_C DLL_API int Get_LoopRestTime(struct
currentRestTime);
Parameters:
• device
• currentRestTime (output value – Rest Time saved onboard)
The function sends a request for the stored rest time.
It returns an error code (see error code table).
DLL_EXTERN_C DLL_API int Set_TriggerWidth(struct
triggerWidth, int& currentTriggerWidth);
Parameters:
• device
• triggerWidth (input value – trigger signal time duration)
• currentTriggerWidth (output value – trigger signal time duration saved onboard)
The function is used to set the time duration of the trigger signal.
It returns an error code (see error code table).
int Get_Position(struct AdaptiveLensDev
int Reset_Position(struct
int Start_Loop(struct AdaptiveLensDev
int Stop_Loop(struct AdaptiveLensDev device);
device, int&
AdaptiveLensDev device,
device, int
AdaptiveLensDev device, int&
AdaptiveLensDev device,
int
restTime, int&
int
25