Power Button Assembly With Fingerprint Reader; Removing The Power Button With Fingerprint Reader - Dell Vostro 3581 Service Manual

Next steps
1 Install the display assembly
2 Replace the heatsink
3 Install the system fan
4 Install the memory module
5 Install the SSD
6 Install the WLAN
7 Install the battery
8 Install the base cover
9 Install the optical drive
10 Install the micro SD card
11 Follow the procedure in

Power button assembly with fingerprint reader

Removing the power button with fingerprint reader

Prerequisites
1 Follow the procedure in
2 Remove the micro SD card
3 Remove the optical drive
4 Remove the base cover
5 Remove the battery
6 Remove the WLAN
7 Remove the SSD
8 Remove the system fan
9 Remove the heatsink
10 Remove the display assembly
11 Remove the power button board
12 Remove the system board
Steps
1 Remove the single (M2x2) screw that secures the power button on the palmrest and keyboard assembly [1].
2 Lift the power button with fingerprint reader board off the palmrest and keyboard assembly [2].
3 Peel the fingerprint reader cable off the palmrest and keyboard assembly.
after working inside your computer
before working inside your computer
Removing and installing components 73