6
Remove the
WLAN
7
Remove the
display assembly
8
Remove the
power button board
Steps
1
Disconnect and unroute the power adapter cable from the system board [1, 2].
2
Remove the single (M2x3) screw that secures the power adapter port to the palmrest and keyboard assembly [3].
3
Lift the power adapter port, along with its cable, off the palmrest and keyboard assembly [4].
Installing the power adapter port
Steps
1
Place the power adapter port into the slot on the palmrest and keyboard assembly [1].
2
Replace the single (M2x3) screw that secures the power adapter port to the palmrest and keyboard assembly [2].
3
Route the power adapter cable through the routing channels [3].
4
Connect the power adapter cable to the system board [4].
76
Removing and installing components