Configuration Management; Introduction; Password; Accessing Configuration Management - Mindray BeneHeart D3 Operator's Manual

19

Configuration Management

19.1 Introduction

Configurations management enables you to customize you equipment to best meet your needs. With this function, you
can:
Change system configuration;
Record system configuration;
Restore the factory default configuration.
After the system configurations have been changed, the equipment restarts and new configuration settings take effect
immediately.

19.2 Password

Accessing configuration management is password protected. The required password is set to 315666 before the
equipment leaves the factory.

19.3 Accessing Configuration Management

To access configuration management, move the Mode Select knob to Monitor, Manual Defib or Pacer, and then press the
Main Menu button on the front panel. Patient monitoring and therapy automatically end when you enter the
Configuration Main menu.
1. Press the Main Menu button on the front panel of the equipment. Select [Others >>]→ [Configuration >>], a
dialog box pops up as shown below:
To view the configurations or change system time, select [View Config]. In this case, password is not required.
To close the dialog box and return to normal operating mode, select [Cancel].
19-1