Troubleshooting - Husqvarna T 7500 Operator's Manual

Hide thumbs Also See for T 7500:
Table of Contents

Advertisement

Available languages

Available languages

4. Tighten a strap around the bag and the container to
secure the bag to the container.
Troubleshooting schedule
Issue
Motor does not start
Motor stops immediately after
starting
Motor runs but there is not suc-
tion
Motor runs but there is poor suc-
tion
Dust blown from motor
Abnormal noise
12

Troubleshooting

Cause
No power
Cable defective
Switch defective
Contactor combination defective
Wrong fuse
Shortcut in cable/machine
Hose not connected
Hose blocked
No dust collection bag
Hole in hose
Filter clogged
Loose top cover
Dirt in the flap
Defective gaskets
Wrongly assembled or damaged filter system
5. Pull the dust bag over the bag holder.
6. Close the bottom of the dust bag with a cable tie.
Solution
Plug in machine
Replace cable
Replace switch
Replace contactor combination
Connect to correct fuse
Order service
Connect hose
Clean hose
Fit dust collection system
Replace hose
Clean filter/ Replace filter
Adjust
Clean the flap
Replace affected gaskets
Adjust/ Replace filters
Order service
877 - 003 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T 8600T 10000T 18000

Table of Contents