Advertisement
Advertisement
Table of Contents
Related Manuals for Adey MagnaClean Professional2XP
Summary of Contents for Adey MagnaClean Professional2XP
- Page 1 Installation and servicing...
- Page 2 The following instructions are designed to support contractors in the safe and effective installation and servicing of MagnaClean Professional2XP and should be followed at all times. It is recommended that the filter is installed by a qualified heating contractor. The lid seal should be checked for wear when servicing MagnaClean .
- Page 3 Servicing 1 - Turn valves off. Remove drain plug. Vent. 2 - Vent. Attach valve Dose with MC1+ disassembly clips Protector. in 2 places. Remove lid Tighten by a ¼ turn max. assembly. Important - Do NOT overtighten. 1 - Turn valves on. Replace drain plug.
- Page 4 4 12 Tighten by a ¼ turn max. Important - Do NOT MagnaClean Professional2XP has been designed as a Bi-directional flow filter. The inline design and overtighten. 360° rotational valves provide multiple installation options for both vertical and horizontal pipework.
- Page 5 For the most up-to-date version of installation and serving instructions visit www.adey.com/us All ADEY marks are trademarks of Adey Holdings (2008) Limited. Please visit adey.com/trademarks for a list of ADEY marks Copyright Adey Holdings (2008) Limited © 2019. All rights reserved.
Need help?
Do you have a question about the MagnaClean Professional2XP and is the answer not in the manual?
Questions and answers