wtw Multi 340i Operating Manual page 16

Technical data
Serial interface
Power supply
Guidelines
and norms used
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
16
Automatic switchover when a PC or a printer is connected via the cable, AK
340/B or AK 325/S.
Type
Baud rate
Data bits
Stop bit
Parity
Handshake
Cable length
Batteries
Operational life
Mains
EMC
Instrument safety
Climatic class
Type of protection
FCC Class A Equipment Statement
RS232, data output
Can be set to 1200, 2400, 4800, 9600 Baud
8
2
None
RTS/CTS + Xon/Xoff
Max. 15 m
4 x 1.5 V alkali-manganese batteries, Type AA
approx. 3000 operating hours
The following applies to all plug-in power supplies:
Connection max. overvoltage category II
Plug-in power supply unit
(Euro, US , UK, Australian plug)
FRIWO FW7555M/09, 15.1432
Friwo Part. No. 1822089
Input: 100 ... 240 V ~ / 50 ... 60 Hz / 400 mA
Output: 9 V = / 1,5 A
EG guideline 89/336/EWG
EN 61326 A1:1998
EN 61000-3-2 A14:2000
EN 61000-3-3:1995
FCC Class A
EG guideline 73/23/EWG
EN 61010-1 A2:1995
VDI/VDE 3540
EN 60529:1991
Multi 340i