Quick Setup Guide - Clean World Distribution, Inc. Rhino-Mat RHM-CS Operation Manual

RHINO-MAT

Quick Setup Guide

Remove the keys (6) including Remove the top hood stands
(1) clamp for the water line
that are attached on the floor
mat tray
Remove the keys (6) including Remove the top hood stands
(1) clamp for the water line
that are attached on the floor
mat tray
Bolt down securely Open left door panel for
power and water installation
Disconnect the switch from Push the lever on the power
the power connection connection to disconnect
the switch. Remove plastic
tightner and metal fastener
attachment
10
Fully Extend the rack to
maximize the use of the tray
4x bolt, washer and lock
washer for each caster
Installation for water on, water
off
Place placard and switch on
panel wall
Apply the metal fastener first Apply the power connection
then the plastic tightner as circuit, you should hear a
shown "click" sound. Check to make
sure the connection is properly
attached
Secure tightly with the Fill up the chemical soultion
fastener provided with the in porvided 1 gallon jug
unit
Pull the electrical connection Connect the drain hose with
through the electrical port as the provided fastner. The drain
shown hose should have a clear path
to the drain
Secure. 110V dedicated outlet R ight side door panel has
and dedicated 30Amp breaker. access to the control box
Please have a qualified which houses the motherboard
electrician complete this step and internal breaker
OPERATIONS MANUAL
Insert a 5/8 inch standard
hose for your water
connection
Secure the heat tape to the
water connection
Use a 3 prong connection.
Please have a qualified
electrician complete
Dip switches control how long
the machine runs every cycle.
Black button is used when
resetting the unit
11