Table Of Contents; Safety Instructions - Clean World Distribution, Inc. Rhino-Mat RHM-CS Operation Manual

RHINO-MAT
Congratulations on the purchase of your Rhino-Mat Wash & Dry System.
The following operations manual has been created to assist you with the
installation, maintenance, and operation of your new Rhino-Mat System.
Please read the following pages thoroughly as they contain important
information about your new equipment.
Thank You. - Clean World Distribution, Inc.
Experience the Difference!

TABLE OF CONTENTS

Safety Instructions
Getting Started
Initial Setup (Self-Serve and Full-Serve)
Quick Setup Guide
Configuration: Full-Serve Models
Auto Shut Off and Delay; Dip Sw 1-8 Chart
Configuration: Self-Serve Models
Control Panel Dip Switch Configuration
Quick Reference
Control Box Dip Sw 1-5 Chart
Control Box Dip Sw 6-8 Chart
Common Pricing and Time Combinations
IDX Hawk Coin Acceptor Configuration
MEI AE2400 Bill Acceptor Configuration
Liquor Carpet Cleaner
Easy Operation Guide: Self-Serve
Easy Operation Guide: Full-Serve
Frequently Asked Questions
Maintenance Schedule
Parts Replacement Instructions
Rhino-Mat Tips
Marketing Strategies
DEMA Adjustable Single Stage Injector
Manufacturer's Warranty / Warranty Card
4

Safety Instructions

IMPORTANT: TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS
EQUIPMENT, PLEASE READ THE SAFETY AND OPERATIONAL
INSTRUCTIONS THOROUGHLY. SAVE ALL DOCUMENTATION FOR
FUTURE REFERENCE.
1.
Page
2.
5
3.
6-8
9
4.
10-11
5.
12-13
6.
14-17
7.
8.
9.
18-19
20-22
10. Disconnect the power cord from the outlet when storing the machine for
23
24
11. Avoid acid-based cleaning solution and flammable solution that can
25
26-27
28-30
12. Always handle machine with caution to avoid personal injury and/or
31-39
40-41
13. Refer servicing inquiries to qualified service personnel. Servicing is
42-43
44-45
46-47
Always exercise extreme caution and apply common sense practices
when working with electricity and electrical components.
Do not block the openings where mats are inserted and ejected.
Do not install near any apparatus that produces extremely high
temperatures.
Use the machine as directed for vehicle mats only.
Ensure the power cord and drain hose is safely out of the way of traffic
to avoid disconnections or accidents.
Disconnect from all electrical power sources prior to installing or
removing components.
Only use attachments or accessories specified and approved by the
manufacturer.
Utilize the provided hood stand pieces to ensure it remains open when
working under the front hood for prolonged periods. Remove pieces and
all other obstructions prior to closing the front hood.
ALWAYS utilize a 3-pronged plug which provides a grounding
connection. Always consult a qualified electrician.
long periods.
wear or corrode the paint and metal finishes of the machine. Use
recommended solution from the manufacture if possible. Manufacturer is
not responsible for any wear to paint & metal finish.
damage when transporting the machine.
required when the machine has suffered severe damage, which includes
but is not limited to damage to the power cord or plug; or when the
machine does not operate or function normally.
OPERATIONS MANUAL
5