Page 1
User Manual Installation Dragon PTN Interface Module PTN-9-L3A-L Installation PTN-9-L3A-L Technical support Release 01 02/2018 https://hirschmann-support.belden.com...
Page 2
In addition, we refer to the conditions of use specified in the license contract. You can get the latest version of this manual on the Internet at the Hirschmann product site (www.hirschmann.com). Hirschmann Automation and Control GmbH Stuttgarter Str.
IFM slot overviews for nodes can be found in the Dragon PTN Nodes manual Ref. [3] in Table 2. Main supported features: Gigabit Ethernet Ports: 8 x SFP (Fiber, optical): 1000BASE-X; 1 x XFP (Fiber, optical): 10GE; Installation PTN-9-L3A-L Release 01 02/2018...
Remove the Module from the Node Untighten the two fastening screws in the front panel. Take the front panel handles to pull out and finally remove the module from the Dragon PTN node. Installation PTN-9-L3A-L Release 01 02/2018...
This pushbutton is hidden and accessible through a small hole on the front panel. This button can be pushed with a sharp fine object e.g. a needle, toothpick… Pushing this reset button causes a soft reset i.e. it is not a cold reset (power-off-on-cycle). Installation PTN-9-L3A-L Release 01 02/2018...
9-L3A-L IFM, the node operates as a router between different IP subnets. IP Subnet1 IP Subnet2 192.168.10.x 192.168.20.x HiProvision PC (=Dragon PTN Management) 9-L3A-L Dragon PTN Node with VRF Dragon PTN IP Subnet1 MPLS-TP Network Figure 2 General Example: 2 IP Subnets (Virtual Routing)/LAN/WAN Installation PTN-9-L3A-L Release 01 02/2018...
Ethernet service. This service must be configured via HiProvision. This service can operate port or VLAN based. b. Port Based / VLAN Based Port based: Use this mode if all the traffic on a port must be transported transparently in one and the same service; Installation PTN-9-L3A-L Release 01 02/2018...
MSTP is fully supported on 9-L3A-L IFMs. On 9-L3A-L IFMs, there is always a default MSTP running even if no MSTP is configured in HiProvision. See Ref. [1] in Table 2 for more configuration information in HiProvision. Installation PTN-9-L3A-L Release 01 02/2018...
Some scalability parameters can be found in §2.2.15. See example figure below. See Ref. [1] in Table 2 for more configuration information in HiProvision. Node with 9-L3A-L IFM including 3 Virtual Router, 9-L3A-L Virtual No 9-L3A-L IFM, Forwarding 0 Virtual Routers Instance Figure 5 Virtual Router Example Installation PTN-9-L3A-L Release 01 02/2018...
Routes (with a same destination) can be favored via a distance parameter. See Ref. [1] in Table 2 for more configuration information in HiProvision. Installation PTN-9-L3A-L Release 01 02/2018...
9-L3A-L IFM. See Figure 3 for a detailed example. See Ref. [1] in Table 2 for more configuration information in HiProvision. L3VPN Dragon PTN MPLS-TP backbone IP subnet 3 IP subnet 2 IP subnet 1 Figure 8 L3VPN Example Installation PTN-9-L3A-L Release 01 02/2018...
HiProvision. BPDU Guard (=Bridge Protocol Data Unit) is a LAN port property or feature that shuts down the LAN port when a BPDU packet enters this port. As a result, this feature or IFM: protects the network against possible loops created via this IFM; Installation PTN-9-L3A-L Release 01 02/2018...
35.0 W (measured at 25°C/77°F, with data transport and fans running) Module Size width: 40.32 mm / 1.6 inches height: 126 mm / 4.96 inches depth: 195 mm / 7.68 inches 3.3 Ordering Information PTN-9-L3A-L: 942 236-005. Installation PTN-9-L3A-L Release 01 02/2018...
MTBF Mean Time Between Failures OSPF Open Shortest Path First Quality of Service Packet Transport Network Virtual Forwarding Interface VLAN ID VLAN Virtual LAN Virtual Router Forwarding VRRP Virtual Router Redundancy Protocol Wide Area Network Installation PTN-9-L3A-L Release 01 02/2018...
Need help?
Do you have a question about the PTN-9-L3A-L and is the answer not in the manual?
Questions and answers