VDP 16.3, VDP 40.3, VDP 60.3
10.6 Mounting Dimensions VDP 60.3
5
1
①
Drilled hole for the mounting bolts, bore diameter 5 mm
②
Mounting cut-out
Fig. 10-19: Mounting dimensions of the VDP 60.3 devices (in millimetres)
10.7 Disassembly
1. Disconnect the operating display
2. Remove all connected cables
3. Remove all nuts from the mounting bolts
4. Carefully press out the operator display from the mounting cut-out, moving
it from the back to the front
DOK-SUPPL*-VDP*XX.3***-IT03-EN-P
Assembly, Disassembly and Electrical Installation
463
231.5
2
453
Bosch Rexroth AG
231.5
29/53