Explaining Signal Words And Safety Alert Symbol - REXROTH IndraControl VDP 16.3 Operating Instructions Manual

Bosch Rexroth AG
Using the Safety Instructions
CAUTION
Do not open the batteries and do not heat them over 80 °C.
Fig. 3-1: Safety instructions – Structure

3.2 Explaining Signal Words and Safety Alert Symbol

The safety instructions in this documentation contain specific signal words (dan-
ger, warning, caution, notice) and, if necessary, a safety alert symbol (according
to ANSI Z535.6-2006).
The signal word is meant to draw the reader's attention to the safety instruction
and signifies the degree of danger.
The safety alert symbol (a triangle with an exclamation point), which precedes
the signal words danger,warning and caution is used to alert the reader to per-
sonal injury hazards.
DANGER
In case of non-compliance with this safety instruction, death or serious injury
will occur.
WARNING
In case of non-compliance with this safety instruction, death or serious injury
can occur.
CAUTION
In case of non-compliance with this safety instruction, minor or moderate injury
could occur.
NOTICE
In case of non-compliance with this safety instruction, property damage could
occur.
4/53
Safety alert symbol
Signal word
Burns and chemical burns due to wrong
battery treatment!
Avoiding danger
VDP 16.3, VDP 40.3, VDP 60.3
Consequences and
source of danger
DOK-SUPPL*-VDP*XX.3***-IT03-EN-P