Electrolux LST15 Instruction Manual page 3

Automatic Lid Lock
Your product has an automatic safety lock on the
lid to prevent accidents. This lock will be activated
during the detection of the intelligent water level
during some stages of rinsing and throughout
spinning and drying. After any interruption of the
detection process of water level, rinsing, spinning
and drying, wait a few minutes for the lid to release. This
time is enough to prevent accidents. When the lid is
locked, the display panel shows this symbol:
Do not force the lid to try to open it. If this occurs,
the product will pause and the display panel will
show PausE. To return to operation, press the START/
PAUSE key.
Lid Manual Lock
If you want, the lid can also be locked manually
using the central lock located in the lid handle. In this
way, the lid will always be locked at any step or even
when OFF to prevent children from entering inside.
To manually lock the lid, move the lock to the left. To
unlock the lid, move the lock to the right.
Electronic Lock of Panel Keys
and Lid
Use this option when you want to prevent the
product configuration from being changed by other
people (or children).
Press the RINSE and
SPIN keys at the same
time for 3 seconds until
the display shows the
.
symbol .
In this condition, all keys are locked except the
ON/OFF key.
Automatic lid lock will also be activated and the
panel will display the symbol
locked in any step (but not with the product OFF).
If you force the lid to open when it is locked, the
product will pause. The panel display will show
PausE and you must unlock the panel to return to
the operation. To do this, press the RINSE and
SPIN keys for 3 seconds. The symbol
off on the display. After it is unlocked, press the START/
PAUSE key to return to operation.
If the product is OFF or in case of a blackout with a
locked panel, when ON again, the locked condition
is retained. If the product is turned OFF, the symbols
and remain ON for a few minutes and the
lid is released after few minutes. In case of a blackout,
the symbols
a few minutes to release the lid.
When the product is turned ON again, it is returned
to the locked condition.
At the end of a washing and/or drying program, the
automatic lid lock is released, but the panel keys
will remain blocked.
For a new program, it is necessary to unlock
the panel by pressing the keys RINSE and SPIN
for 3 seconds.
. So, the lid remains
and will turn OFF, but it will take
will turn
3