Electrolux LST15 Instruction Manual page 10

8
Water level
0
By default, the INTELLIGENT water
level is set by factory. In this option, your
washer-dryer machine will automatically
place the required quantity of water
according to the amount of dry clothing
that was placed in the drum.
If you put wet clothes in the drum and use
the Intelligent level of water, the amount of
water can be more than the required for washing.
Manually select the water level in this case. To
select the water level manually, press the WATER
LEVEL key and select the desired level.
9
0 Your product already has a standard program set
by factory. This program can be changed
according to your needs. Press the keys as illustrated
below as desired. The blue light will indicate the
selected options.
Note: Some options are not available for certain
programs. See section 5 Washing and/or Drying
Program details.
10
0
Press the START/PAUSE key to start the Washing
and/or Drying Program.
The START/PAUSE key can
be used temporarily
start or stop the program
selected.
When you want to change a program already in
progress, press the key, make the desired changes
and press the START/PAUSE key again. When the
key is pressed, the word PAUSE will be displayed
on the display panel.
10
IMPORTANT
• If your product remains with the key,
START /PAUSE activated for more than
1 hour, it will turn OFF automatically.
• I f t h e l i d i s o p e n e d d u r i n g t h e
program, the product will pause.
To return to program, close the lid and
press the START/PAUSE key.
• If the product is spinning and/or drying
and the START/PAUSE key is pressed,
the product will take a few minutes to
start again.
11
0
If you want, use the DELAY START
key to delay the start of washing
and drying. Each time the key is
pressed, it will add a period of
two hours to the start of the selected
program. After you have selected the time of
DELAY START, press the START/PAUSE key
to start the counting time. The panel display will show
and will start a countdown to the beginning of
the selected program. At the end this count, the
product starts the selected program.
12
0
If you want, use the FAVORITE key to save any
program of your preference. For
this, set the washing and/or drying
in the way you desire and press the
FAVORITE key for 3 seconds. When
using the product again with the
same program, press the FAVORITE
key and then the START/PAUSE key. When this
option is used, the symbol
the display.
13
0
If you only want to rinse clothes, press
the ON/OFF key and then press the
RINSE key for 3 seconds to activate
this function. Select the type of rinse
and then press the key START/
PAUSE.
Note: The ECO option merges water
jets with spinning, providing a saving
of water up to 40%. However, it does
not allow the use of softener.
will be shown on