FourStar 11210452CB Assembly Instructions

MODEL: 11210452CB
ENTERTAINMENT CENTER
STEP 1
INSERT BRACKET (5) TO PANELS (B) & (C).
(5) x 1pc
(5) x 2pcs
(5)
unfinished surface
STEP 5
TIGHTEN BRACKET (5) TO PANEL (A) WITH SCREW (2).
(2) x 12pcs
(2)
(B)
(A)
(5)
unfinished surface
(B)
(C)
STEP 9
REINFORCE PANEL (F) & (G) TO PANEL (C) WITH SCREW (3).
(G)
(F)
(H)
(3) x 12pcs
(C)
(H)
(F)
(C)
(G)
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS
CAREFULLY. FOLLOW THEM STEP BY STEP.
CAUTION:
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING
AND ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT
DAMAGE TO THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
ASSEMBLY TOOLS REQUIRED
HAMMER
PHILIPS SCREWDRIVER
Do you have any questions? Missing small parts or hardware? If you need
assistance with the assembly of your ENTERTAINMENT CENTER please e-mail our
support@fourstari.com or
Customer Service Department at:
call us at (800) 639-3803 or (508) 473-7688
from Massachusetts area
Please include the following information in your email:
• Where item was purchased • Item, model, style or SKU number listed on
instructions or box • Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
STEP 2
INSERT WOODEN DOWEL (4) INTO PANELS (C) (F) (G) (H).
(4)
(4) x 2pcs
(4) x 2pcs
STEP 6
ATTACH PANEL (D) & (E) TO THE ASSEMBLED PARTS WITH
SCREW (1).
(E)
(H)
(C)
(C)
(D) (A)
(H)
(B)
(E)
(1) x 8pcs
STEP 10
UPRIGHT THE ENTERTAINMENT CENTER. COVER THE SCREW
POISTION WITH SCREW CAP (6).
(3)
PARTS LIST AND HARDWARE
NO HARDWARE LIST
1 CHIPBOARD SCREW M4X38mm
2 CHIPBOARD SCREW M4X25mm
3
PH TAPPING SCREW #8X3/4"
4
WOODEN DOWEL
45mm BRACKET
5
6 SCREW CAP COVER
7
WALL MOUNTING SET
if calling locally
STEP 3
ATTACH PANEL (B) TO PANEL (C) WITH SCREW (1).
(1) x 4pcs
STEP 7
REINFORCE PANEL (B) TO PANEL (D) & (E) WITH SCREW (3).
(D)
(D)
(1) (B)
(E)
(3) x 8pcs
(C)
STEP 11
IT IS STRONGLY RECOMMENDED THAT THE ENTERTAINMENT CENTER IS FIXED TO A WALL. USING WALL MOUNTING SET (7),
ATTACH THE L-BRACKET TO THE TOP OF THE ENTERTAINMENT CENTER WITH SHORT SCREW. DRILL A HOLE SMALLER THAN THE
ANCHOR PLUG, INSERT THE ANCHOR PLUG INTO THE HOLE USING A RUBBER MALLET UNTIL THE ANCHOR PLUG IS FLUSH WITH
THE WALL, THEN FASTEN IT WITH LONG SCREW.
(6) x 16pcs
anchor plug
(7)
wall
(6)
entertainment top
NO PARTS LIST
QTY
20 PCS
A
TOP PANEL
12 PCS
FRONT & BACK
B
SUPPORT PANEL
20 PCS
C SIDE SUPPORT PANEL
16 PCS
D LEFT LEG PANEL
6 PCS
E RIGHT LEG PANEL
16 PCS
LEFT LEG
F
1 SET
APRON PANEL
RIGHT LEG
G
APRON PANEL
LEG SUPPORT PANEL
H
LEG CENTER
I
SUPPORT PANEL
J SHELF PANEL
STEP 4
4.1 ATTACH PANEL (I) TO PANEL (H) WITH SCREW (1).
4.2 ATTACH PANEL (J) TO ASSEMBLED PARTS WITH SCREW (1).
(1)
STEP 8
ATTACH PANEL (F) & (G) TO PANEL (D) & (E) WITH DOWEL (4).
(E)
(D)
(C)
(A)
(3) (D)
(B)
(F)
(G)
L-bracket
QTY
D F
1 PC
G
2 PCS
B
A
2 PCS
E
E
2 PCS C
2 PCS G
I
J
2 PCS
H
D
F
2 PCS
2 PCS
1 PC
1 PC
(1) x 4pcs
(J)
STEP 4.1
(1) STEP 4.2
(G)
(F)
(E)
(D)
(E)
(4)