Savaria Toyota Sienna Owner's Manual page 9

Stowing the Flat-Floor:
1. Carefully reach into the vehicle and use the cut-out handles to pull
the end-panel back, and lay it flat on the mid-panel.
2. Rotate the locking handles, located on the sides of the ramp, to sit
vertical against the backstop.
3. Use the cut-out handles to firmly pull the mid panel to the vertical
position. The locking handles will hook onto the ramp to hold it
temporarily in the stowed position. While holding the top of the
ramp and pulling it outward, re-engage the locking handles by
rotating them upward to be parallel with the sides of the ramp.
1
3
2
Always hold the top of the ramp while
operating the locking handles. Failure to do
this may lead to the ramp falling forward.
Do not use the Flat-Floor ramp or operate the
Flat-Floor ramp handle mechanism when
there is a wheelchair occupant inside the
vehicle.
9