4.
Raise the backrest and headrest.
It is not safe to drive the vehicle if the thumb screw in the seat base is not installed.
4.1.2 2nd Row Flip Bucket Seats
For removal and installation, follow the steps outlined in Section 4.1.1.
Flipping the seat to the side (from the driver's side):
1.
Lower the backrest and headrest.
2.
Locate the black release handle underneath the seat as shown,
and pull it upward. If the handle seems difficult to pull, try pushing
down on the inboard side of the seat while pulling up on the
release handle. This will relieve pressure on the locking pin.
1
26
2