2Nd Row Removable Bench Seat - Savaria Toyota Sienna Owner's Manual

3. Insert the thumb screws into the threaded hole at the front of the
keyhole plate.
4. Release the locking tether (see "Flipping the bench down", above
5. Ensuring the rear latches are in the open position, flip the rear of
the bench down with sufficient force to engage the rear latches
with the hooks in the floor. If one or both of the rear latches does
not engage, pull the black release lever and try again with more
force. If difficulty arises, contact Savaria® Vehicle Group.
6. Flip the backrests and headrests up.

4.1.4 2nd Row Removable Bench Seat

This bench is equipped with a black release strap (located at the rear
of the bench) to temporarily pivot forward for removal or to allow
passengers to enter/exit through the side doors.
Since there is no safety tether on this bench, the vehicle should not be driven if the rear
latches are disengaged as the bench could fall down and cause serious injury.
It takes a minimum of two people to install/remove this bench seat.
33