Groups; Functions - Blackmagicdesign Ultimatte 12 Operation Manual

The available information and configuration settings are described below:
About
Displays detailed status information about your Ultimatte, including:
‚
Model name
‚
Software version
‚
Video format
‚
IP address
‚
Subnet mask
‚
Default gateway.
Smart Remote 4 Information is also included, such as:
‚
Remote version
‚
Flash version
‚
Temperature
‚
Fan speed
‚
Blackmagic Design contact information should you need support.
Configuration
Provides an overview of connected SDI sources and will tell you whether they are locked or not.
Control Board Settings
Lets you customize the brightness of the Smart Remote 4's LEDs and set the the internal
fan speed.
Options
Turns the mouse pointer on or off if you have a mouse connected to your smart remote.
Enables the monitor out cascade feature.

Groups

This section of the interface contains the majority of the setting menus. For example, if you
wanted to adjust the foreground 'flare' controls:
1 Tap on the 'foreground' main menu button to open the foreground settings.
2 Tap on the 'Flare 1' button in the groups section to select the flare controls.
The flare controls will now be visible on each side of the panel and you can adjust them using
the control knobs.
MATTE
PROCESS
SCREEN
SAMPLE
CUSTOM
MON OUT

Functions

The functions section provides specific settings that can be selected, enabled or disabled.
For example, the reset button is located in this section if you need to restore particular settings
to their default state.
MATTE
MATTE
RESET
GROUPS
CLEAN UP
VEIL FILTER
CUSTOM MONITOR
MENUS
FUNCTIONS
CURSOR POS
LAST
OUT
AUTO SCREEN
SAMPLE
Controlling Ultimatte with Smart remote 4 16 16