Table of Contents
Advertisement
Component
System board
Base cover
Removing the base cover
1
Follow the procedure in
2
To remove the base cover:
a
Loosen the 3 captive screws that secure the base cover to the palmrest and the keyboard assembly [1].
b Remove the 6 (M2x5) screws that secure the base cover to the palmrest and the keyboard assembly [2].
c
Using a plastic scribe, pry the base cover starting from the top-left corner and working through the edges of the system. [1].
d Lift the base cover away from the system [2].
16
Removing and installing components
Screw type
M2x2 Big Head
Before working inside your
Quantity
4
computer.
Screw image
Advertisement
Table of Contents
