Table of Contents
Advertisement
NOTE:
This step is applicable only to the systems that are shipped with power button with fingerprint reader.
6
Install the:
a
system fan
b
battery
c
base cover
7
Follow the procedure in
Display assembly
Removing the display assembly
1
Follow the procedure in
2
Remove the:
a
base cover
b
battery
c
WLAN
d
system fan
3
To remove the display assembly:
a
Peel the adhesive tape that secures the IO board cable to the IO board connector [1].
b Open the IO board connector latch and disconnect the IO board cable from the connector on the IO board [2].
c
Peel the adhesive tape that secures the display cable to the display cable connector [3].
d Open the display cable connector latch and disconnect the display cable from the connector on the system board [4].
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
45
Advertisement
Table of Contents
