Installing The Touchpad - Dell Vostro 5481 Service Manual

Installing the touchpad

1 Align and place the touchpad to the slot on the palmrest and keyboard assembly [1].
2 Replace the four (M2x2 Big Head) screws to secure the touchapd to the palmrest and keyboard assembly [2].
3 Connect the hard drive cable to the connector on the system board and close the connector latch [1].
4 Connect the touchpad cable to the connector on the system board and close the connector latch [2]
5 Affix the adhesive tape to secure the touchpad to the palmrest and keyboard assembly [3].
62 Removing and installing components