Advertisement

QUICK USER GUIDE MIXER HC
These short instructions may only be used by trained personnel who are familiar with the
operating manual and the device. Observe the safety precautions.

Temperature Control and Mixing

Switch off „PROGR." function (see below).
Use
The device starts with temperature control/mixing.
After the time has elapsed, mixing ends,
however, temperature control continues.

Interval Mix

To switch on/off interval mix: Press
Control light will light when function is activated.
Use
to set temperature and total time.
To set mix time
To set stop time
The device starts alternates continually between temperature control and
mixing. Mix – Pause, etc., until the total time has elapsed. Temperature
control is then continued.
to set temperature, mixing frequency and/or time.
longer than 2 seconds.
use the keys

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mixer HC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for StarLab Mixer HC

  • Page 1 QUICK USER GUIDE MIXER HC These short instructions may only be used by trained personnel who are familiar with the operating manual and the device. Observe the safety precautions. Temperature Control and Mixing Switch off „PROGR.“ function (see below). to set temperature, mixing frequency and/or time.
  • Page 2 QUICK USER GUIDE MIXER HC Progr. To switch on/off „PROGR.“: Press longer than 2 seconds. Control light will light when function is activated. to set temperature, mixing frequency and/or time for the first mixing/temperature control run (temperature control and mixing or interval mix).

Table of Contents