Advertisement
Advertisement
Table of Contents
Related Manuals for Jar Furniture BEGA
Summary of Contents for Jar Furniture BEGA
- Page 1 Assembly Instructions BEGA TV Unit...
- Page 2 WARNING FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE THAT IS NOT COVERED BY YOUR WARRANTY Read Instructions carefully. Lay out all of the components on a soft surface Check no parts are missing. as if you were preparing to do a jigsaw puzzle. Carefully identify each component, especially Separate and identify each component from the those that are similar.
- Page 3 What you Need To Assemble the Body (Tools not provided) Phillips Head Screwdriver TV Unit (P1) 3 x Handle 1 x Short 1 x Long 2 x L Bracket 1 x Cable Screw Screw (H5) with Screw (H1) (H2) (H3) (H4) Please make sure you have all these parts before you start.
- Page 4 Step 1 Warning Sticker ANTI TIPPING STICKER IS You will need: LOCATED ON THE INSIDE OF THE TOP DRAWER WHICH IS 3 x Handle LOCATED ON THE LEFT HAND with Screw SIDE CORNER (H1) (H1) Attach 3 x Handle to Drawer with 3 x Screws (H1).
- Page 5 Step 4 (H4) You will need: 1 x Cable (H4) Place the buffet into position so both mounting (P1) brackets are vertically in line. Lace the end of the restraint strap through the larger hole in each mounting bracket. Bring both ends together and slide the flat end through the locking end and draw it through until all slack is removed.
Need help?
Do you have a question about the BEGA and is the answer not in the manual?
Questions and answers