Technical Characteristics - IMET Spa BASIC 300 PLUS SHI Instructions For Use Manual

INSTRUCTIONS FOR USE
6 – TECHNICAL CHARACTERISTICS
- Hydraulic semiautomatic bandsaw, mitre cutting from 0° to 60° left and from 0° to 45° right
- Hydraulic vice with adjustable guides, free to move alongside the worktable, with quick motion and
clamping.
- Easy stops at 0°, 45°, 60° left and 45° right
- Adjustment of the blade tension from the front side of the sawframe, checked by an end-stroke
- Blade tension 1700 kg/cm
- Blade guides with hard metal pads, additional bearing for blade alignment
- Cast-iron sawframe with tubular section, pulleys 320mm diameter
- New blade guard which allows an easy and quick replacement of the blade
- Mechanical device (position sensor) that allows the sawframe to lower quickly toward the material and
detect automatically the start-cut point
- Connection element for loading table equipped with roller, 300mm wide
- Adjustable bar stop, blade-cleaning brush, bi-metal blade
- Possibility to connect a foot pedal to start the cutting cycle
- Main switch with minimum tension coil, emergency button, thermic and magnetic motor protection,
motor absorption device
- Floor stand with removable chip collector tank
- Tank with coolant electro-pump, hydraulic unit with oil.
- Tools and user's book
- In compliance with CEE Safety and Electro-magnetic Compatibility Norms (EMC)
- Electrics according to the Norms EN60204-1, EN55011, EN50082-2
If not otherwise reported, all technical data refers to the standard 3-phase, 400V, 50 Hz version.
mm. Kw
2765x27x0,9 1.5-1,8
3~
1.5
3~
Dimensions
(mm)
When working
packed
BS300 Plus SHIing ED.2010 rev.00
= blade size
=motor type with related blade speed (at 50 Hz);
M/min mm
35-70 300
18/110 300
(ESC)
B
Width
1230
1400
= cutting capacity
= weight
Kg
412
417
45° Right
L
Length Height
1700 1750
1400 1680
8 - 66
= vice opening
mm
255 230
210 190
135 110
180 160
H H
Worktable height
940
mm
300x180
200x160
130x100
180x100