IMET Spa BASIC 300 PLUS SHI Instructions For Use Manual page 2

INSTRUCTIONS FOR USE
We recommend to read carefully the information here included in order to install, use and maintain correctly
and safely this machine.
Please refer always to this instruction manual in case of assistance service need and keep it carefully for all
the machine life. The reference number in ITALY is +39 035 4387918 or +39 035 4387928r.
A consequence of the continuous improvement of the product is that some images/descriptions here included
could not correspond to the improved features of the machines. Your kind help would allow us to offer a
prompt assistance.
In the enclosed Compliance Declaration you will find the Safety and Reference Norms applied during the
planning and construction of this machine. The choice and the use of the parts have been made considering
the conditions of use and the long machine life.
The identification plate, with the serial number, is placed on the side of the machine or on the control panel
1.1 - ATTACHED DOCUMENT FOR E.M.C. ( INDUSTRIAL ENVIRONMENT)
The user is responsible for the installation and use of this machine in compliance with the manufacturer's
instructions shown in this manual. This equipment meets the protection requirements in accordance with the
Directives 2006/42/EEC, 2004/108/CE for Electromagnetic Compatibility (EMC). In particular, it follows the
technical guidelines of the Directives EN55011, EN50082-2 and it has been made for industrial and not for
household use.
In the event of electromagnetic interferences the user is responsible for solving the problem with the help of
the technical assistance by the manufacturer. Before installing the machine the user must take into account
possible electromagnetic problems of the working area. In particular, we suggest to install the machine away
from:
-signalling, control and telephone cables;
-radio-television transmitters and receivers;
-computers or controlling and measuring instrument;
-safety and protection devices.
The electric supply cable must be kept as short as possible, without any twists.
Covers, doors and the frame must be suitably closed when the saw is operating.
Under no circumstances the machine must be modified except for adjustments and changes specifically
approved by the manufacturer. Follow the maintenance schedule.
BS300 Plus SHIing ED.2010 rev.00
2 - 66