Securing Your Child; Infant Car Seat Mode; Using The Infant Car Seat Receivers - Britax B-LIVELY User Manual

Securing Your Child

1. Release the harness by depressing the
button in the center of the buckle while
pulling the two tongues away from the
buckle assembly.
2. Fasten the harness by inserting the
tongues on the harness straps into the
buckle assembly.
3. Tighten or loosen the harness straps by
sliding the harness adjusters.
14

Infant Car Seat Mode

• All infant car seats MUST be installed rear facing.
• Always remove the infant car seat receivers when not in use.
Failure to do so may result in injury.
IMPORTANT: For non-Britax infant car seats, an infant car seat
adapter frame must be used. This adapter frame is sold separately at
select retailers and on us.britax.com.

Using the Infant Car Seat Receivers

Attaching the Infant Car Seat Receivers
NOTE: Receivers are marked left and right. Attach each from the
position of the occupant.
1. Lock the parking brake.
2. Align the receiver with the mount on
the inside frame of the stroller, then
push down until a click is heard.
Pull up on the receiver to ensure it is
secure.
3. Attach the snap on the receiver strap
to the snap on the stroller seat strap
inside the stroller frame.
4. Repeat for the other side.
CLICK
15