Radio Operation - Silvercrest SRD 250 A1 Operating Instructions Manual

GB
NOTICE
IE
► The time of day will revert back to - -:- - if the device is discon-
nected from the mains power supply and no batteries have
been inserted.

Radio operation

♦ Press the POWER/BAND button
♦ With the VOL control
♦ Press briefl y the POWER/BAND button
frequency band. With VHF reception the MHz-LED
with MW reception the kHz-LED
♦ With the TUNING control
♦ Press for approx. two seconds the POWER/BAND button
switch the device off .
NOTE
► The technical realities of the appliance permit an adjustable
frequency range outside the permitted frequency ranges
of VHF (FM) 87.5 - 108 MHz and/or MW (AM) 526,5 -
1606,5 kHz. In some countries, diff erent national regulations
may apply to the assigned radio frequency ranges. Please
note that information received outside of the assigned radio
frequency ranges may not be used, passed on to third parties
or otherwise misused.
12
Handling and operation
to switch the device on.
9
set the desired sound level.
18
lights up.
5
set the desired radio station.
7
to set the desired
9
lights up,
4
SRD 250 A1
to
9