Change Back Light Mode - Rae MultiRAE PLUS PGM-50 Operation And Maintenance Manual

4.7.5 Change Back Light Mode

The MultiRAE monitor allows a user to choose to turn on
and off LCD back light automatically when ambient light
falls bellow or above a threshold level or to turn on and off
the back light manually by pressing the [N/-] key.
1. The sixth sub-menu item in Table 4.6 is "Change
Backlight Mode?"
2. Press [Y/+] key, the display shows the current back light
mode: "Back Light Mode = manual turn on?"
3. Press the [Y/+] key to accept the currently displayed
back light mode. Press [N/-] key to change to the other
back light mode: "Back Light Mode = manual turn on?"
Press [MODE] key to exit this sub-menu and move to
the first monitor setup sub-menu.
4. If there is any change to the existing selection, pressing
the [Y/+] key the display will show "Save?" Then, press
the [Y/+]
move to the next sub-menu.
PROGRAMMING OF MULTIRAE
key to accept or the [N/-]
4 - 34
key to discard and