Cisco Ucs 6332 Fabric Interconnect - Cisco UCS 6332 Hardware Installation Manual

Cisco UCS 6332 Fabric Interconnect

Cisco UCS 6332 Fabric Interconnect
The Cisco UCS 6332 Fabric Interconnect is a 1 RU, top-of-rack switch with 32 40-Gigabit QSFP+ ports, one
100/1000 network management port, one RS-232 console port for setting the initial configuration, and two
USB ports for saving or loading configurations. The switch also includes an L1 port and an L2 port for
connecting two fabric interconnects to provide high availability. The switch mounts in a standard 19-inch
rack, such as the Cisco R Series rack.
Cooling fans pull air front-to-rear. That is, air intake is on the fan side and air exhaust is on the port side.
Figure 1: Cisco UCS 6332 Fabric Interconnect Rear View
1
3
For additional information about the port groups, see
Figure 2: Cisco UCS 6332 Fabric Interconnect Front View
1
3
Cisco UCS 6300 Series Fabric Interconnect Hardware Installation Guide
2
Port lane switch button, port lane LEDs,
and L1 and L2 ports. For additional
information about the port lane switch
and LEDs, see Lane Switch and LEDs,
on page 8.
Ports 27–32 operate as 40-Gbps QSFP+
ports.
Power supply and power cord connector
Management, console, and USB ports, and
LEDs. For more information about the
connections ports and LEDs, see
Ports and LEDs, on page 10.
2 Ports 1–12 and ports 15–26 can operate as
40-Gbps QSFP+ ports, or as 4 x 10-Gbps
SFP+ breakout ports.
Ports 1 - 4 support Quad to SFP or SFP+
(QSA) adapters to provide 1-Gbps/10 Gbps
operation.
Ports 13 and 14 can operate as 40-Gbps
QSFP+ ports. They cannot operate as 4 x
10-Gbps SFP+ breakout ports.
Port Numbering, on page
2 Fans1 through 4, numbered left to right, when
facing the front of the chassis
Connection
Product Overview
5.