Cisco UCS 6332 Hardware Installation Manual page 15

Product Overview
Note The maximum length of fiber optic runs is limited to 300 meters. This is imposed by our use of
802.3X/802.1Qbb Priority Pauses. SFP-10G-LR is supported between fabric interconnect and I/O Module,
but the 300 m limit still applies.
SFP+ Transceivers and SFP+ Copper Cables
The enhanced SFP+ 10-Gigabit Ethernet transceiver module is a bidirectional device with a transmitter and
receiver in the same physical package. It has a 20-pin connector on the electrical interface and duplex LC
connector on the optical interface.
Table 4: Supported Transceivers
Product ID
SFP-10G-SR
SFP-10G-SR -S
SFP-10G-LR
SFP-10G-LR -S
FET-10G
SFP+ Copper Cables with Integrated Transceivers
SFP-H10GB-CU1M
SFP-H10GB-CU2M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
SFP-H10GB-ACU7M
SFP-H10GB-ACU10M
SFP-10G-AOC1M
SFP-10G-AOC2M
SFP-10G-AOC3M
SFP-10G-AOC5M
SFP-10G-AOC7M
Description
10GBASE-SR SFP+ module (multimode fiber
[MMF])
10GBASE-SR SFP+ module (multimode fiber
[MMF], S-Class)
10GBASE-LR SFP+ module (single-mode fiber
[SMF])
10GBASE-LR SFP+ module (single-mode fiber
[SMF], S-Class)
Cisco 10G Line Extender for FEX
10GBASE-CU SFP+ cable 1 meter, passive
10GBASE-CU SFP+ cable 2 meter, passive
10GBASE-CU SFP+ cable 3 meter, passive
10GBASE-CU SFP+ cable 5 meter, passive
10GBASE-CU SFP+ cable 7 meter, active
10GBASE-CU SFP+ cable 10 meter, active
10GBASE-AOC SFP+ cable 1 meter
10GBASE-AOC SFP+ cable 2 meter
10GBASE-AOC SFP+ cable 3 meter
10GBASE-AOC SFP+ cable 5 meter
10GBASE-AOC SFP+ cable 7 meter
Cisco UCS 6300 Series Fabric Interconnect Hardware Installation Guide
SFP+ Transceivers and SFP+ Copper Cables
13