ABB Ekip E-Hub Manual page 24

Laptop Configuration:
Register on
The user is not blocked by any Firewall, Device or Software from reaching
https://stsint.abb.com
The User will also need access on port 443 to the application or service he is accessing
The user is generally able to connect to the internet and reach other internal (if
connected to ABB Network) or external internet websites.
The user has cookies enabled in the browser.
Topology for
Connect your laptop via Ethernet cable to the same Ethernet network where the Ekip E-
Provision
Hub LAN2 is connected:
Fig. 17
2TFP900034A1001 ECN000087106 Rev. A
MyABB to activate an account.
on port 443
LAN1
NOTE: Before provisioning, please synchronize the time of Ekip E-Hub manually or
by switching on SNTP in Ekip Connect 3.
For SNTP, you should choose accessible servers available in your region.
NOTE:
Performing a second commissioning on an Ekip E-Hub module already
provisioned to an ABB Ability EDCS plant, will allow only for updating the plant's
devices configuration (e.g. when you need to add a new device to the EDCS' plant).
NOTE:
In order to create a new plant you will need to delete all the devices and
Ekip E-Hub connected to the specific plant directly from the ABB Ability EDCS
webapp (Select the plant, then Devices > Delete device). This will remove the
association of the devices and the Ekip E-Hub from a plant and make them
available for a commissioning on a new plant.
LAN2
• •
RS-485 1/2
Laptop
Ekip E-Hub | 24