ABB Ekip E-Hub Manual page 18

Show The Show Clients will show the clients that communicate with Ekip E-Hub.
Clients
• Click Communication > Clients
Fig. 11
Ekip E-Hub has a six bits DIP-switch on board, 1 to 6 are arranged in order from left to right.
Dial Currently Ekip E-Hub only use the sixth bit function that enable or disable TFTP. When the
Settings sixth bit is on top, Ekip E-Hub will enable TFTP, and provisioning operation can be carried
out. Ekip E-Hub software will auto disable TFTP 30 minutes later, but the sixth bit is still in
its original position. Therefore, toggle the sixth bit to bottom and toggle it to top in
advance of carrying out provisioning.
Fig. 12
2TFP900034A1001 ECN000087106 Rev. A Ekip E-Hub | 18