Sierra Wireless MP 880W User Manual page 72

Sierra wireless modem user guide

Table of Contents

MP880W Modem User Guide

The fast rate timer only becomes active when an alarm

condition is triggered by a rise or drop in the level of one of the

digital I/O channels. The default for the fast rate timer is three

seconds.

Note: When the fast rate timer is set to 0, a single report is sent when

an I/O alarm is triggered.

If the GPS timer is set to a value other than 0, it controls the

frequency of reports in the absence of any alarm or event

triggers. (However, if the GPS timer is set to a longer interval

than the low rate timer, the value for the low rate timer will

determine report frequency.)

MP modem

10 seconds

Digital I/O alarm

3 seconds

Host

Fast rate timer = 3 seconds

Low rate timer = 5 minutes

GPS timer = 10 seconds

TM_SUM_REG_IND

2130795

Table of Contents