WANHAO Duplicator 8 MARK I User Manual page 14

4.1 Printing by USB
4.1.1 After slicing process copy the sliced model into the USB memory that comes with
printer or any other USB memory that your prefer to place the file in.
4.1.2 In the Home Screen press on CWS BY USB, Choose the Sliced file press on Print
Now, Printer starts to load the model and lower the building platform and the printing
process begins.
4.2 Printing by WIFI
4.2.1 Insert the Dongle
AFTER SALES SUPPORT
14
86-571-23290996
Model : Duplicator 8 MARK I
support@wanhao3dprinter.com