Honda G100K2 Applications Manual page 59

TEMPERATURE
GD 320 / 321 / 410 / 411
Engine oil temperature
Fuel inside fuel tank temperature
Exhaust gas temperature
GD 1100 / 1250
Cooling water temperature (at engine discharge) 2600 rpm type
Water hose surface under continuous load
Water hose surface after stopping
Diesel fuel temperature at injection pump inlet
Engine oil temperature (drain bolt)
Inlet port temperature
Timing belt chamber temperature
Head cover gasket temperature (exhaust port side)
Exhaust gas temperature
TEMPERATURE CONVERSION FORMULA
The outside temperature and engine temperatures must be measured and converted to the specified 40 °C
ambient air temperature.
Conversion formula:
Example: engine oil temperature 100 °C / ambient air temperature 20 °C
40 °C - 20 °C + 100 °C
3000 rpm type
3600 rpm type
°C
40 °C - +
Ambient air Measured
temperature temperature
< 140 °C
120 °C < 140 °C
Maximum temperature (converted)
120 °C
60 °C
Within recommended operating range (see performance curves)
Under 105 °C
Under 100 °C
Under 100 °C
110 °C
130 °C
70 °C
120 °C
60 °C
100 °C
150 °C
Within recommended operating range (see performance curves)
°C
< Maximum temperature
- 58 -