SYMA GYRO REMOTE CONTROL SERIES User Manual page 10

C. Toggling between headless function and normal function:
Front
Front Front
Left Right
Left Left
Right Right
Back Back
Back
8.Wireless real-time transmission funtion
1.Downloading the installation software
For Android phones,download and install the SYMA GO APP by visiting
the www.symatoys.com or by scanning the QR code.
For IOS Apple phones,download and install the SYMA GO APP by visiting
the App Store or by scanning the QR code.
Reminder: QR codes are provided on the packaging box and at the bottom of
the user manual. Please visit website www.symatoys.com or the App
Store/Google Play to obtain the newest SYMA GO App.
2.How to connect
1.Connect the model to its power source, the camera indicator light should turn
green. Within 10 seconds, the light will flash slowly and the camera will be
waitting for a connection with a smartphone.
2.At this time, enter the "Settings" option on your phone, and turn on WLAN. In
the WLAN search list, look for a network called "FPV-WIFI- ****" and connect to
it. Once connection has been established, exit the "Settings" option.
3.Open the SYMA GO App, click the "START" icon to enter the control interface.
A full bar in the WiFi signal strenght icon indicates the strongest possible signal.
1. Open up SYMA GO
APP.
1. After the drone is matched with the corresponding
frequency, the drone would be in normal pattern by default. At
this time the indicator light on the drone would be in a state of
on for a long time. After pressing in on the right joystick of the
remote control for 2 seconds, the remote control would make
a sound of "beep, beep, beep" to show that it has entered into
a state of headless mode.Pressing in on right joystick for 2
seconds then a long sound of "beep" would be heard to show
an exit status.(When under the state of headless mode, four
indicator lights on the drone are led lights which flicker once
every four seconds)
2. Under the headless mode, the operator does not need to
differentiate the head position of the drone, and only needs
to control the drone's direction front/back/left/right by using
the right joystick direction on the remote control.
2. Click the "START" icon,
the system will enter the
APP operation interface
automatically.
-9-
3. The phone's screen
will display real-time
images.