SYMA Gyro Remote Control Series User Manual page 12

3. Turning off the drone
1.If the drone is out of the range of the flight, the indicator light will
flash slowly, and then slow down.
2.When the remote control is switched off or the power is cut off, the
drone will automatically slow down to stop.In the process , open
the remote control to control again.
Method 2: Move the left and right joysticks
inwards in an internal loop of "8" for 1
second, the blades of the drone start
rotating slowly.
Method 3: When the drone is stationary,press
the B button, the drone automatically
takes off and hovers at a certain
height.
Method 1: Push the left joystick (Accelerator)
to the lowest level and hold there for
2 to 3 seconds, the drone can then
be turned off.
Method 2: Move the left and right joysticks
inwards in an internal loop of "8" for 1
second, and the drone can be turned
off.
Method 3: When the drone is in flight, press the
B button, the drone will descend to
the ground and lands.
-11-