Ford ECOSPORT Owner's Manual page 41

E78276
Locking and unlocking requires a valid
intelligent access key to be located within
one of the there external detection ranges.
These are located approximately 1 m from
the front door handles and from the swing
gate handle. You can also use the
Intelligent Access key as a remote control.
See Locking and Unlocking (page 34).
Locking Using Intelligent Access
E248554
Touch the outer door handle lock sensor
for approximately one second to lock,
being careful to not touch the unlock
sensor on the back of the door handle at
the same time. After locking, you can
immediately pull on the door handle to
confirm locking occurred without
inadvertently unlocking.
Note: Your vehicle does not lock itself
automatically. If you do not lock, your
vehicle will remain unlocked.
Note: Locking touch surfaces are located
on each of the front doors.
EcoSport (CBW) India, Vehicles Built From: 14-08-2017, GN15-19G219-ZCA enIND, Edition date: 201708, First Printing
Doors and Locks
For central locking and to arm the alarm:
•
After locking the doors with the lock
sensor, there is a brief delay before you can
unlock your vehicle.
This delay lets you pull the handle to make
sure your vehicle is locked.
Note: When the delay period is over, you
can open the doors again, provided the
Intelligent Access is within the respective
detection range.
Two short flashes of the direction
indicators confirms that all the doors and
swing gate have been locked and that the
alarm (if equipped) has been armed.
Unlocking Using Intelligent Access
E248553
Note: Your vehicle remains locked for
longer than three days, the system will enter
an energy-saving mode. This is to reduce
the discharge of your vehicle battery. When
your vehicle is unlocked while in this mode,
the reaction time of the system may be a
little longer than normal. To exit the
energy-saving mode, unlock your vehicle.
With your intelligent access key within 1 m
of your vehicle, touch the unlock sensor on
the back of the door handle for a brief
period and then pull on the door handle to
unlock, being careful to not touch the lock
sensor at the same time or pulling the door
handle too quickly. The intelligent access
system requires a brief delay to
authenticate your intelligent access key
fob.
Note: Keep the door handle clean to make
sure the system operates correctly.
37
Touch the locking surface once.