Changing The Wiper Blades; Adjusting The Headlamps - Ford ECOSPORT Owner's Manual

Hide thumbs Also See for ECOSPORT:
Table of Contents

Advertisement

Clean the wiper blades with washer fluid
or water applied with a soft sponge or
cloth.
CHANGING THE WIPER
BLADES
Changing the Windshield Wiper
Blades
Note: The windshield wiper blades are
different in length.
Note: If you install wiper blades of the
wrong length, the wiper blades can clash
damaging the wiper system.
E170913
1.
Pull the wiper blade and arm away
from the glass.
1
E72899
2. Press and hold the locking button.
3. Remove the wiper blade.
4. Install in the reverse order.
EcoSport (CBW) India, Vehicles Built From: 14-08-2017, GN15-19G219-ZCA enIND, Edition date: 201708, First Printing
Maintenance
2
153
Note: Make sure that the wiper blade locks
into place.

ADJUSTING THE HEADLAMPS

Vertical Aim Adjustment
The headlamps on your vehicle are
properly aimed at the assembly plant. If
your vehicle has been in an accident, the
alignment of your headlamps should be
checked by your authorized dealer.
E142592
A
8 feet (2.4 meters)
B
Center height of lamp to ground
C
25 feet (7.6 meters)
D
Horizontal reference line
Vehicles With Halogen Headlamps
1.
Park the vehicle directly in front of a
wall or screen on a level surface,
approximately 25 feet (7.6 meters)
away.
2. Measure the height of the headlamp
bulb center from the ground and mark
an 8 foot (2.4 meter) horizontal
reference line on the vertical wall or
screen at this height.

Advertisement

Table of Contents
loading

Table of Contents