Table of Contents
Advertisement
12 DIMENSIONS
13 ASSEMBLY
9
Always make sure that power to the controller is completely
disconnected before removing the cover.
− Unscrew the cross-head screw holding the cover in place.
Pull the cover outwards and downwards to remove it
from the controller.
62
110
Cross-head
screw
8
46
− Mark the top fixing point on the mounting plate or wall.
Drill the hole and fit the plug and fixing screw supplied
with the controller.
Cover
Cable conduits
with strain relief
− Fit the controller casing over the top fixing point and
mark the position of the bottom fixing hole (distance be-
tween holes 130 mm).
− Drill the hole and fit the bottom wall plug.
Display
Button
Fuse T2A
Advertisement
Table of Contents
