Controller Power Supply - Datacolor AHIBA IR Pro User Manual

Main Power Supply Connection
Below are the power connections that can be used.
Ahiba IR Pro should work in <=40A protection circuit.
230V AC standard mains
230V AC, 1N/PE, 50/60 Hz, 3850 W; Fuse: 15 A
230V AC high power mains
230V AC, 2/PE, 50/60 Hz, 3850 W; Fuse: 15 A

Controller Power Supply

The Ahiba IR Pro controller is powered separately from the machine. Before
turning the controller on, check that the power connection from the main power
cord is completed and checked for correct voltage levels. When you have
verified the connection:
1.
2.
3.
14 • Equipment Controls and Indicators
Turn on the main power switch located on the lower back of unit.
Locate the controller power switch on the rear of the controller box:
Press the top of the button to activate the controller. Press the bottom of the
button to cut the power to the controller.
(e.g., Europe)
(e.g., US, Canada, Japan)
Ahiba IR Pro User's Guide