Controller Power Supply - Datacolor Ahiba IR User Manual

Main Power Supply Connection
Below are the power connections that can be used.
230V AC standard mains
230V AC, 1N/PE, 50/60 Hz, 3850 W; Fuse: 15 A
230V AC high power mains
230V AC, 2/PE, 50/60 Hz, 3850 W; Fuse: 15 A

Controller Power Supply

The Ahiba IR controller is powered separately from the machine. Before turning
the controller on, check that the power connection from the main power cord is
completed and checked for correct voltage levels. When you have verified the
connection:
1.
2.
3.
Ahiba IR User's Guide
Turn on the main power switch located on the back of unit.
Locate the controller power switch on the rear of the controller box:
Press the top of the button to activate the controller. Press the bottom of
the button to cut the power to the controller.
(e.g., Europe)
(e.g., US, Canada, Japan)
Equipment Controls and Indicators • 13