Datacolor AHIBA IR Pro User Manual page 23

•
•
•
See also Appendix, Beaker Loads for minimum and maximum beaker load
specifications.
Beaker Connections
Below are some guidelines to consider when connecting a beaker to the wheel:
Ahiba IR Pro User's Guide
The beakers should be distributed evenly around the wheel. Do not
overload one section of the wheel with the beakers (see diagram
below).
All beakers must have the same liquor volume.
All beakers should be the same approximate temperature as the
reference beaker.

The sensor lead is connected and locked to the beaker by the rotating
collar of the sensor.

Continue turning the collar until the connection is locked.

To insure that the cable is locked to the beaker lid, pull on it slightly.
Reference Beaker
r
Beake
Sensor
Index • 17